InnoFit® Lodestar Kit
[KLS001]
- A cost-effective guided surgery solution applicable to various types of clinical cases.
- Universal to any implant system.
Drilling Sequence
Drill Protocol (Non Sleeve)
Drill Protocol (Sleeve)
* The 14mm Drill must be used after using the 10mm Drill to enable sleeve contact
For the use of the 14mm Drill with exact contact to the Sleeve, use the Ø2.0x10mm Drill first before using the 14mm Drill.
e.g.) 3.4 X 14mm Drilling Sequence
* Drilling method
- Make sure with drilling in a desired direction without a change in path through the primary drill contact (A) with the hole created by the previous drilling and the secondary contact (B) with the Sleeve.
- Create the hole using the Initial Drill and insert the next drill into the hole made during the previous step and drill after achieving the drill and Sleeve contact (A&B).
- If drilling only with the Sleeve contact (B) without the drill contact (A), the path may not be correct.
* Precaution when irrigating
- Irrigate enough to the end of the drill hole.
