SINUS LIFT KIT
[KSA001]
- Sinus Lift Kit is the world’s most innovating kit for performing maxillary sinus lift, ridge splits, and bone condensing cases.
- This revolutionary kit uses US Patented modified Tap Drills and Spreaders in order to allow any dentists to easily lift, split, or condense surrounding bone with simple drilling. Dentists can expect more predictable results, and patients can enjoy less traumatic surgeries with shorter chair time.
Sinus Lift
Tap Drill (Ø3.6 ,Ø4.6)
- The Tap Drill uses low speed and high torque to grind through the maxillary bone, and safely elevates sinus without membrane perforation.
- Must be used at 20 rpm / 40~45N.cm.
- No irrigation is required.
Twist Drill (Ø3.6, Ø4.6)
- The Twist Drill is used after tapping as final drill for dense bone (Bone quality of 2 or greater), or to eliminate tapping thread in order to facilitate bone grafting.
- Must be used at 20 rpm / 40~45N.cm.
- No irrigation is required.
Spreader
Tap Drill (Ø3.2 , Ø3.8, Ø4.2, Ø4.8, Ø5.1)
- The Spreader Drill is used to condense and/or spread the bone in either sinus lift or ridge split cases.
- Must be used at 20 rpm / 40~45N.cm.
- No irrigation is required.
Sequence -Sinus Lift
Only use of Sinus Lift Drill
1. Sinus Lift (Ø4.0 Fixture)
▶ Immediate Implantation and Sinus Lift Technique with Tap Drill (Ø4.0 Fixture)
2. Sinus Lift (Ø5.0 Fixture)
▶ Immediate Implantation and Sinus Lift Technique with Tap Drill (Ø5.0 Fixture)
Recommend to use Sinus Lift Drill and Spreader Drill together
1. Sinus Lift (Ø4.0 Fixture)
2. Sinus Lift (Ø5.0 Fixture)
Note
- Recommend to use Sinus Lift Drill and Spreader Drill together during the Sinus Lift operation.
- Easily operate by using Ø3.2 Spreader rather than Point Drill.
- Avoid to over press surrounding alveolar bone using Final Drill before fixture placement in D2.
ex) Ø4.0 Fixture placement
Sequence-Spreader
▶ Immediate Implantation and Sinus Lift Technique with Tap Drill (Ø4.0 Fixture)
