InnoGenic™ GBR Kit
[KIGBR001]An all-in-one solution for various types of GBR procedures
Screw Kit KIGICS001
- Used without removing the Screw Kit from the inside of the kit tray
(Remove to use if necessary only). - Made of special material for autoclaving.
* Rotate the upper lid to take out the selected product.
Composition
| Classification | Product | Code | Quantity |
|---|---|---|---|
| Bone | Fixing Screw (Fixing) |
 KIGFS03 |
5 |
 KIGFS05 |
5 | ||
 KIGFS07 |
5 | ||
| Tenting Screw (Tenting) |
 KIGFS07 |
4 | |
 KIGTS10 |
4 | ||
 KIGTS13 |
4 | ||
 KIGTS15 |
4 | ||
| Tenting Cap (T/Cap) |  KIGTC32 |
3 | |
| Fixture | Fix Connector (F/Connector) |
 KIGFC4505 |
2 |
 KIGFC4510 |
2 | ||
 KIGFC4515 |
2 | ||
 KIGFC4520 |
2 | ||
| Cover Cap (C/Cap) |  KIGCC45 |
2 | |
| Healing Cap (H/Cap) |
 KIGHC453 |
2 | |
 KIGHC454 |
2 | ||
 KIGHC553 |
2 | ||
 KIGHC554 |
2 |
Empty Screw Kit KIGICS
Bone
Fixing Screw (Fixing)
- Used to fix the membrane to the bone.
- Place slowly using the Fixing Driver (Machine/Handle).
- 3, 5 and 7mm length can be selected according to the bone quality.
In hard bone, use after forming a basic drill hole using the Fixing Screw Drill. - The wedge-shaped design is advantageous for self-tapping, allowing it to be
fixed without drilling in normal bone. - The double thread shortens the placement time.
| D(Ø,mm) | C(mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| 2.0 | 0.6 | 3.0 | 3.6 | KIGFS03 |
| 5.0 | 5.6 | KIGFS05 | ||
| 7.0 | 7.6 | KIGFS07 |
Bone
Tenting Screw (Tenting)
- Used when a large area of vertical / horizontal GBR is required.
Leave space for bone grafts. - Recommended placement depth : Hard bone-3mm, Normal bone-5mm,
soft bone-more than 5mm. - Initial fixation of at least 15~25 N.cm is required. Tightening more than
35 N.cm may cause fracture of the Tenting Screw so it must be fixed below 35 N.cm. - In normal bone, it is recommended to form a hole at least 3mm deep
using the Tenting Screw Drill before placing the Tenting Screw. - The wedge-shaped design is advantageous for self tapping, allowing it to
be used without drilling in normal bone. - The double thread shortens the placement time.
- Use the Tenting Cap if necessary.
| D(Ø,mm) | C(mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| 3.2 | 2.5 | 7.0 | 9.5 | KIGTS07 |
| 10.0 | 12.5 | KIGTS10 | ||
| 13.0 | 15.5 | KIGTS13 | ||
| 15.0 | 17.5 | KIGTS15 |
Bone
Tenting Cap (T/Cap)
- Used to fix membrane on the Tenting Screw.
- Tightened with the 0.9 Hex Driver.
- Recommended tightening torque force : 5~8 N.cm.
| D(Ø,mm) | C(mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| 3.2 | 0.3 | 2.8 | 3.1 | KIGTC32 |
Fixture
Fix Connector (F/Connector)
- Used to fix the membrane along with the Cover Cap or Healing
Cap after connecting to the fixture. - Tightened with the 0.9 Hex Driver.
- Recommended tightening torque force: 12~15 N.cm.
- Available for the INNO Submerged, Submerged Short Fixtures
and other fixtures compatible with them only.
| D(Ø,mm) | C(mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| 4.5 | 0.5 | 5.7 | 6.2 | KIGFC4505 |
| 1.0 | 6.7 | KIGFC4510 | ||
| 1.5 | 7.2 | KIGFC4515 | ||
| 2.0 | 7.7 | KIGFC4520 |
Fixture
Cover Cap (C/Cap)
- Used to fix membrane over the Fix Connector.
- For submerged surgery in case of sufficient soft tissue.
- Recommended tightened with the 0.9 Hex Driver.
- Recommended tightening torque force: 5~8 N.cm.
| D(Ø,mm) | C(mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| 4.5 | 0.3 | 3.4 | 3.7 | KIGCC45 |
Fixture
Healing Cap (H/Cap)
- Used to fix membrane over the Fix Connector.
- For non-submerged surgery in case of insufficient soft tissue.
- Connect by using the 0.9 Hex Driver.
- Recommended tightening torque force: 5~8 N.cm.
| D(Ø,mm) | C(mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| 4.5 | 3.0 | 3.4 | 6.4 | KIGHC453 |
| 4.0 | 7.4 | KIGHC454 | ||
| 5.5 | 3.0 | 6.4 | KIGHC553 | |
| 4.0 | 7.4 | KIGHC554 |
Fixing Screw Drill & Tenting Screw Drill
- Used to place the Fixing Screw / Tenting Screw mainly in hard bone.
- Also used to perforate cortical bone when blood supply is required.
- For normal bone, drill only 3mm deep if necessary.
- Drill before placing the Fixing Screw / Tenting Screw.
- Laser-marked at 3, 5 and 7mm long from the tip of the drill and
the length can be controllable using the Drill Stoppers. - Color-banded for distinction
(Red : Fixing Screw Drill, Blue : Tenting Screw Drill). - Recommended drilling speed : 1,000~1,200 rpm.
| Classification | D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| Fixing Screw Drill | 1.0 | 10 | 31.5 | KFSD10 |
| Tenting Screw Drill | 1.4 | KTSD14 |
Drill Stopper
- Used by connecting to the Fixing Screw Drill / Tenting Screw Drill.
- 3mm : Yellow, 5mm : Red, 7mm : Blue
| Classification | D(Ø,mm) | H(mm) | Code |
|---|---|---|---|
| 3mm | 3.5 | 13.5 | KIGDS03 |
| 5mm | 11.5 | KIGDS05 | |
| 7mm | 9.5 | KIGDS07 |
0.9 Hex Driver (Ratchet)
- Used to install the Tenting Cap, Fix Connector, Cover Cap and Healing Cap.
| D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|
| 1.2 | 8 | 15 | *KHD0915 |
| 14 | 21 | KHD0921 | |
| 20 | 27 | *KHD0927 |
* Optional
Fixing Screw Driver & Tenting Screw Driver (Machine)
- Used to place the Fixing Screw / Tenting Screw using Contra-angle.
- Color-banded for distinction
(Red : Fixing Screw Driver, Blue : Tenting Screw Driver).
| Classification | D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| Fixing Screw Driver | 1.6 | 6.0 | 24.0 | KFSMD24 |
| Tenting Screw Driver | 2.2 | KTSMD24 |
Fixing Screw Driver & Tenting Screw Driver (Handle)
- Used to place the Fixing Screw / Tenting Screw using the Driver Handle.
- Color-banded for distinction (Red : Fixing Screw Driver, Blue : Tenting Screw Driver).
| Classification | D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|---|
| Fixing Screw Driver | 1.6 | 6.0 | 24.0 | KFSMD24 |
| Tenting Screw Driver | 2.2 | KTSMD24 |
Driver Handle
- Used to place and remove the Fixing Screw / Tenting Screw by connecting the Driver Handle.
| D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|
| 19.8 | 75 | 135.0 | KIGH |
Round Bur
- Used to perforate cortical bone when blood supply is required.
- Recommended drilling speed : 1,200~1,500 rpm.
| D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|
| 1.0 | 9.5 | 34.0 | KIGRB10 |
Bone Trimmer
- Used to perform osteoplasty on the outer wall of remaining bone all during
GBR and to flat the bone surface for improving the fit of membrane. - Used to remove remaining granulation tissue of bone defect part (use instead
of surgical curette). - Recommended drilling speed : 1,200~1,500 rpm.
| D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|
| 5.0 | 13 | 34.0 | KIGBT50 |
Harvesting Drill & Drill Stopper
- Drill for convenient harvesting of autogenous bone in the form of bone chip in a short period of time.
- The Silicon Shield of the Ø3.5 Harvesting Drill makes sure with no bone chip loss while drilling (Bone chip can be collected at implant site).
- 6 Silicon Shields are included in the Kit (1 is assembled with the Ø3.5 Harvesting Drill and 5 are
packed in the lower tray). - The maximum drilling depth of the Ø3.5 Harvesting Drill is 12mm, so it needs to be drilled slowly.
- Remove while rotating the drill.
- Recommended drilling speed : 300~500 rpm.
| D(Ø,mm) | L(mm) | H(mm) | Code |
|---|---|---|---|
| 3.5 | 9.5 | 39.2 | KBH35 |
| 5.0 | 6.5 | 36.5 | KBH50 |
| D(Ø,mm) | H(mm) | Code | |
|---|---|---|---|
| Drill Stopper | 5.6 | 9 | KBHD3540 |
| 6 | 14.3 | KBHD4550 |
Bone Carrier
- Narrow tip is beneficially handled in most of the bone graft techniques.
- Bone graft particles can be accurately and safely injected without contamination.
- rhBMP-2 can be easily coated to the implant due to circular groove of tip.
- Bone graft particles and rhBMP-2 solution can be well mixed on the circular groove.
* Bone Carrier length is 94mm and the total length after stretching is 114mm.
| D(Ø,mm) | H(mm) | Code | |
|---|---|---|---|
| Bone Carrier | 6 | 94 | KBBC01 |
