INNO Surgical Kit

INNO Sub. Smart Surgical Kit

[KSA002]

Sub. Implant system (Ø3.5, Ø4.0, Ø4.5, Ø5.0, Ø6.0)
A simpler kit for implant surgery, applied to all length of implants with drills and stoppers

Drill

Stopper

Countersink

Extension & Driver

Length Marking & Stopper

Actual Length of Drill : Fixture + 1mm

* While the 2.2 Drill is used at 1000 RPM and irrigation must be accompanied,
the drills from 3.5 to 5.0 should be used at 50 RPM without irrigation.

Drill Sequence

INNO SUB. FULL SURGICAL KIT

[KCA010F]

Fixture Driver for INNO Sub. Fixture placement, the rest of component is for Sub. / Int. / Ext.

Drill Sequence

- Minimal drill frequency with Point Drill, Ø2.2 Initial Drill and
  Final Drill (Ø3.5, Ø4.0 and Ø4.5 fixtures)
- Length Marking

※ Countersink and Tap drill used in hard bone quality

Ø6.0 fixture: a series of point drill, Ø2.2 Initial drill, Ø4.0 final drill, Ø5.0 final drill and Ø6.0 final drill
Ø5.0 fixture: a series of point drill, Ø2.2 Initial drill, Ø4.0 final drill and Ø5.0 final drill

Sloped ednetulous ridge adjacent of tooth

Crestal cutter of initial drill and final drill
Longer drills than fixture’s length

Crestal Flatting

Longer Final Drill

Wide extraction socket

Absence of the cortical bone & spongy bone
Narrower diameter than the fixture’s diameter

Torque force control

- The 0.5mm deeper placement increases the initial
  torque force of fixture.
- The pumping action of drill removes the bone chip in the hole.
- In dense bone, the debriment action decrease the high torque force.

In weak bone quality 4 of maxillary tuberosity

No pumping action
0.5mm deeper placement of fixture
Wider fixture than final drill

Inno-Sub.Short Surgical Kit

[KSI001]

Drill

Stopper

Countersink

Extension & Driver

Length Marking & Stopper

Actual Length of Drill : Fixture + 0.5mm

Drill Sequence

Inno-Sub.Narrow Surgical Kit

[KSI001]

Drill Sequence

Inno-Int. Full Surgical Kit

[KCA010FI]

For the Selection and Use Guide of the Components for the Sub. Int. & Ext. Surgical Full Kit
Fixture Driver for INNO Int. Fixture placement, the rest of component is for Sub. / Int. / Ext.

Inno-Ext. Full Surgical Kit

[KCA010FE]

For the Selection and Use Guide of the Components for the Sub. Int. & Ext. Surgical Full Kit
Fixture Driver and Multi Countersink for INNO Ext. Fixture placement, the rest of component is for Sub. / Int. / Ext.

PROSTHETIC KIT

[KPA003]

Sub. Implant system
Try-in Kit for determining abutment specifications

Abutment Gague

Measuring of the diameter, cuff length and angulation of abutment

Abutment Driver

Used in Shoulder, Solid, Absolute, and Straight abutment placement